WOOD POLISHING
Varnish polish
A mixture of oils and resins, varnish provide s a durable top-coat that protects furniture and other wood products. Not only does it resist heat, but it also repels water and alcohol and keeps wood from getting scratched easily. To show the finish best and give any piece of wood that high-gloss shine, you must buff and polish the varnish as well. Buffing produces very small scratches that reflect the light to your eye, like a diamond’s facets. Polishing increases the shine while protecting the surface beneath. Buff and polish freshly varnished wood, and repeat periodically for beautiful wood.
DURABILITY :
- MEDIUM
PRE-PAINTING STEPS
SANDING
Sand the wooden surface along the grains using sand paper no. 180, and then 320 or 400. Wipe surface to clean off loose dust particles.
DENT FILLING
If the surface has dents, apply WoodTech Filler with a putty knife over the dented area.
STAINING
To colour, apply WoodTech Wood Stains Interiors or WoodTech Wood Stains Exteriors by ragging or spraying. Allow to dry for 30 to 120 minutes.
Wood Tech Melamyne
Melamine is an organic compound that is often combined with formaldehyde to produce melamine resin, a synthetic polymer that is fire resistant and heat tolerant. The resin is a versatile material that has a highly stable structure.
Melamine polish consist thin resin that forms a thin film like coating when applied on wood surface. Melamine polish is a closed pore polish i.e. it makes the wood non-breathable product that protects wood from mainly hot and cold surfaces placed over it.
DURABILITY :
- MODERATE
PRE-PAINTING STEPS:
SANDING:
Sand the wooden surface along the grains using sand paper no. 180, and then 320 or 400. Wipe surface to clean off loose dust particles.
INSULATING:
(Optional) Apply 1-2 coats of WoodTech Epoxy Insulator to insulate from oil & resin from the wood, also it reduces absorption of a paint material on Veneer or Plywood & MDF.
DENT FILLING:
If the surface has dents, apply WoodTech Filler with a putty knife over the dented area.
STAINING:
To colour, apply WoodTech Wood Stains Interiors or WoodTech Wood Stains Exteriors by ragging or spraying. Allow to dry for 30 to 120 minutes.
Polyurethane (PU) Polish
Polyurethane (P.U) finish serves as a hard protective layer that absorbs the scratches and dings that would permanently damage a surface. With each scratch or scuff, however, the polyurethane gloss begins to dull, eventually becoming dirty and worn looking. You can reverse this process by polishing the polyurethane with mild abrasives, creating a high-gloss look that gives your surface a smooth, bright and scratch-free appearance.
DURABILITY :
- VERY HIGH
PRE PAINTING STEPS:
SANDING:
Sand the wooden surface along the grains using sand paper no. 180, and then 320 or 400. Wipe surface to clean off loose dust particles.
INSULATING:
(Optional) Apply 1-2 coats of WoodTech Epoxy Insulator to insulate from oil & resin from the wood, also it reduces absorption of a paint material on Veneer.
DENT FILLING:
If the surface has dents, apply WoodTech Filler with a putty knife over the dented area.
STAINING:
To colour, apply WoodTech Wood Stains Interiors or WoodTech Wood Stains Exteriors by ragging or spraying. Allow to dry for 30 to 120 minutes.
Recent Wood Polishing
